Yeni bir adsorban kullanılarak katı faz ekstraksiyonu ile krom türlemesi
Künye
Demir, D. (2012). Yeni bir adsorban kullanılarak katı faz ekstraksiyonu ile krom türlemesi. Yüksek Lisans Tezi. Yozgat Bozok Üniversitesi Fen Bilimleri Enstitüsü, Yozgat.Özet
Bu çalışmada, Cr(III) ve Cr(VI)'nın türlemesi, ayrılması ve zenginleştirilmesi için yeni bir katı faz ekstraksiyon metodu geliştirildi. Bu amaçla katı faz ekstraksiyonunda adsorban olarak kullanmak üzere poli(1,3-tiazol-2-il metakrilamid-ko-4-vinil piridin-ko-divinilbenzen) kopolimeri sentezlendi. Sentezlenen kopolimer elementel analiz ve FT-IR ile karakterize edildi.Model çözelti kullanılarak geliştirilen zenginleştirme yönteminin optimum parametreleri pH:2 elüent türü ve derişimi: 4M NH3, elüent hacmi: 20 mL, örnek akış hızı: 2 mL/dk, elüent akış hızı: 1 mL/dk, örnek hacmi: 150 mL olarak belirlendi. Metodun zenginleştirme faktörü 30, gözlenebilme sınırı 2.4 µg/L olarak bulundu. Yöntemin adsorpsiyon kapasitesi ve bağlanma denge sabiti sırası ile 80.03 mg/g ve 0.018 L/mg olarak hesaplandı. Geliştirilen yöntem dere suyu ve atık su örneklerine uygulandı. Polimer aynı zamanda geliştirilen yöntemin doğruluk kontrolü için standart referans madde örneğine (SRM) (TMDA-52.3) uygulandı ve kantitatif sonuçlar elde edildi (R ? 95%). In this study, a solid-phase extraction method was developed for Cr(III) and Cr(VI) 's speciation, seperation and enrichment. For this purpose, as an adsorbent for use in solid phase extraction poly (1,3-thiazol-2-yl methacrylamide-co-4-vinyl pyridine-co-divinylbenzene) copolymer was synthesized. Synthesized copolymer was characterized by elemental analysis and FT-IR.Optimum parameters of developed enrichment method using model solution: pH:2, type and concentration of the eluent: 4M NH3, eluent volume: 20 mL, sample flow rate: 2 mL/dk, eluent flow rate: 1 mL/dk, sample volume: 150 mL were determined. Method?s Enrichment factor 30 and detection limit 2.4 µg/L was founded. Method?s adsorption capacity and equilibrium binding constant was calculated 80.03 mg/g and 0.018 L/mg, respectively. The developed method were applied to stream water and waste water samples. At the same time, The polymer was applied to certified referance material (CRM) (TMDA-52.3) sample and quantitative results were obtained (R ? 95%).
Koleksiyonlar
- Tez Koleksiyonu [41]